View ST622XC-KIT_210350.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ST622XC-KIT
STARTER KIT FOR ST620x, ST621x and ST622x MCUs
HARDWARE FEATURES
s
SOFTWARE FEATURES
s s s s s
s
s
s
Immediate evaluation of all ST620x, ST621x and ST622x devices, with stand-alone demonstration routines. Simulation and debugging within the user's real application environment. In-socket programming of all DIL OTP and EPROM ST620x, ST621x and ST622x devices. In-circuit programming of all DIL and SO OTP and EPROM ST620x, ST621x and ST622x devices directly on the user's application board.
Software simulation, including I/O read/write. Assembler, Linker and Debugger. In-socket OTP and EPROM programming utilities. In-circuit OTP and EPROM programming utilities Application examples and demonstrations
August 1998
This is advance information from STMicroelectronics. Details are subject to change without notice.
1/4
725
ST622XC-KIT
The Starter Kit Board
The Starter Kit board has the following resources: * Reset and data control buttons. * * * * * LED indicators. Resistance trimmer. Temperature control circuit. RS-232 interface. Demonstration program selector jumpers. * * It includes the following connectors: * A parallel port connector (P1) for connection to the host PC when it is used as a hardware simulator or for programming. A remote resource I/O interface connector (J2) to which you can connect your own hardware resource. An RS-232 connector, which you can use for observing RS-232 communication control using an ST6. A connector for your own in-circuit ST6 programming board.
It comes with its own power supply unit that can be plugged into an AC mains source, or a DC source with the following characteristics: * Voltage: 16V min./20V max., Current: 100 mA min.
*
2/4
726
ST622XC-KIT
The following diagram shows the layout of the Starter Kit board.
1 2 3 4 5 6 7 8 9 10
In-circuit programming connector (J1). 8 Mhz oscillator. PC connector P1. 4 LEDs. Heater resistor LED indicator LD6. Power supply JACK connector J3. Heater resistor. Power supply LED indicator LD5. Thermistor. "+" and "-" buttons.
11 12 13 14 15 16 17 18 19
RESET button. Demonstration routine selector. RS232 interface circuit and connector. 10 K trimmer. DIL 20-28 ZIF MCU socket. DIL 16 ZIF MCU socket. Remote resource I/O interface connector J2. "ST6220" or "ST6225" device selection jumpers W1. "Programming" or "User" operating mode selection jumpers W2.
1 W2 2 3 4 5 W4 6 7 8 W10 9 W5 W6 W8 W9 W7 W1
19 18 17 16
W3
15 14 13 12 11 10
3/4
725
ST622XC-KIT
Figure 1. Block Diagram of the Starter Kit board *
POWER SUPPLY UNIT DAC LEDs
TEMPERATURE TRIMMER CONTROL RS232 P2
J3 JP1
ST62E25
PARALLEL CONNECTION TO PC AND SOFTWARE SIMULATOR P1 ST622x I/O CONNECTION J2 USER APPLICATION
EPROM PROGRAMMER
IN-CIRCUIT PROGRAMMING J1
ORDERING INFORMATION Sales Type ST622XC-KIT/UK ST622XC-KIT/110 ST622XC-KIT/220 Description Starter Kit for ST620x; ST621x and ST622x MCUs for operation in United Kingdom Starter Kit for ST620x; ST621x and ST622x MCUs for operation from 110 Vac mains Starter Kit for ST620x; ST621x and ST622x MCUs for operation from 220 Vac mains
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without the express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c)1998 STMicroelectronics - All Rights Reserved. Purchase of I2C Components by STMicroelectronics conveys a license under the Philips I2C Patent. Rights to use these components in an I2C system is granted provided that the system conforms to the I2C Standard Specification as defined by Philips. STMicroelectronics Group of Companies Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com
4/4
726

▲Up To Search▲

Price & Availability of ST622XC-KIT

	To Download ST622XC-KIT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .